벽에 액자걸기, How to hang on

 벽에 액자를 거는 방법, How to hang on

준비물 : 드릴, 콘크리트 비트, 칼브럭, 스크루나사, + 드라이버 비트, 망치, 칼

Prepare : Drill, Concrete bit, Wall plug(Screw anchor), Screw, Cross driver. Hammer, Knife

1. 콘크리트 비트, Concrete bit

http://item.gmarket.co.kr/Item?goodscode=1805182438

2. 칼브럭, Anchor 6mm[1/4 inch), 나사, Screw 4mm(5/32 inch)

https://www.ikea.com/kr/ko/p/fixa-260-piece-screw-and-plug-set-20169248/

3. +드라이버 비트, Cross driver bit

https://www.amazon.com/Metabo-HPT-115003M-Phillips-Magnetic/dp/B07QKXMJC6/ref=sr_1_5?dchild=1&keywords=cross+driver+bit&qid=1601724036&sr=8-5

4. 드릴, Drill

https://www.amazon.com/DEWALT-DCF885C1-20V-Impact-Driver/dp/B01LBT3AZU/ref=sr_1_3?dchild=1&keywords=drill&qid=1601724096&sr=8-3

방법 : 드릴에 콘크리트비트를 장착하고, 구멍을 뚫어준다, 망치로 칼브럭을 구멍에 박아 넣는다. 칼블럭 길이가 남으면 칼로 잘라낸다, 드릴에 +드릴비트를 장착하고 스크루 나사를 박는다, 액자를 건다.

How to : You can drill the hole with a drill equipped with concrete bit. Hammer the anchor inside the hole, Cut remaining part when a anchor outside a little part exist.

Drill the screw inside the anchor with drill equipped with cross drill bit. Put something on anchored screw on to the wall.